Two-dimensional function photonic crystals

In this paper, we have studied two-dimensional function photonic crystals, in which the dielectric constants of medium columns are the functions of space coordinates , that can become true easily by electro-optical effect and optical kerr effect. We calculated the band gap structures of TE and TM waves, and found the TE (TM) wave band gaps of function photonic crystals are wider (narrower) than the conventional photonic crystals. For the two-dimensional function photonic crystals, when the dielectric constant functions change, the band gaps numbers, width and position should be changed, and the band gap structures of two-dimensional function photonic crystals can be adjusted flexibly, the needed band gap structures can be designed by the two-dimensional function photonic crystals, and it can be of help to design optical devices.     

High-pressure phase transitions of Cu2O

In the present study, we extensively explored the crystal structures of Cu₂O on increasing the pressure from 0 GPa to 24 GPa using the first-principles density functional calculations. A series of pressure-induced structure phase transitions of Cu₂O are examined. The calculated results show that the phase transitions (Pn-3m phase → R-3m phase → P-3m1 phase) occur at 5 GPa and 12 GPa, respectively. The P-3m1 phase is found to be the metallic phase via band-gap closure under high pressure.     

Observation of capillary discharge Ne-like Ar 46.9?nm laser with pre-pulse and main-pulse delay time in the domain of 2–130?μs

We demonstrated the lasing of Ne-like Ar 46.9?nm pumped by capillary discharge with the delay time between pre-pulse and main-pulse ranging from 2 to 130???s. Results show that the laser output reduced significantly when the delay time is much longer than 12???s. The temporal evolution of spontaneous radiation emitted from pre-ionized plasma implies that the observed reduction of the laser output is caused by the axial non-uniformity of pre-ionized plasma density and the decrease of pre-ionized plasma density.     

Structural,magnetic and optical properties of vanadium doped zinc oxide: Systematic first-principles investigations

The electronic structural, magnetic and optical properties of pure and V-doped ZnO are investigated by first-principles calculations based on the density functional theory. With the introduction of V atoms, the spin-splitting near the Fermi level leads to a net magnetic moment of the system. A significant possibility of room temperature ferromagnetism (RTFM) originated from the Ruderman–Kittel–Kassuya–Yosida (RKKY) exchange is predicted. Oxygen vacancy is positive to enhance the ferromagnetism while zinc vacancy is negative. With respect to the optical properties, the presence of V atoms was found to have an obvious influence on the transmittivity, especially in the low energy region. A slight V-doping can keep a high optical transmission and smoothly modulate the optical bandgap.     

Additive assisted hydrothermal synthesis,characterization and optical properties of one dimensional DyPO4:Ce3+ nanostructures

One dimensional nanostructures of cerium doped dysprosium phosphate (DyPO₄:Ce³⁺) were synthesized via hydrothermal route in the presence of different surfactants [sodium dodecyl sulfate (SDS), dodecyl sulfosuccinate (DSS), polyvinyl pyrollidone (PVP)] and solvent [ethylene glycol and water]. The prepared nanostructures were characterized by Powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FE-SEM), Transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), UV-VIS-NIR absorption spectrophotometer and photoluminescence (PL) studies. The PXRD and FTIR results indicate purity, good crystallinity and effective doping of Ce³⁺ in nanostructures. SEM and TEM micrographs display nanorods, nanowires and nanobundles like morphology of DyPO₄:Ce³⁺. Energy-dispersive X-ray spectra (EDS) of DyPO₄:Ce³⁺nanostructures confirm the presence of dopant. UV-VIS-NIR absorption spectra of prepared compounds are used to calculate band gap and explore their optical properties. Luminescent properties of DyPO₄:Ce³⁺ was studied by using PL emission spectra. The effect of additives and solvents on the uniformity, morphology and optical properties of the nanostructures were studied in detail.     

Existence analysis of an optimal shape design problem with non coercive state equation

In this paper, a shape optimization problem, modelling a welding process, governed by a second order non coercive PDE is considered. The well posedness of the shape optimal design problem is showed using the degree of Leray–Schauder. Then the existence of an optimal solution is proved.     

A study of the catalytic behavior of phosphotungstic acid-modified Janus particles in a heterogeneous oil/water pickering emulsion system

An emulsion interface materialization method was used to obtain amphiphilic silica Janus nanoparticles. Reducing the photosynthesis of aquatic organisms after water pollution. PW₁₂O₄₀³⁻ was introduced onto Janus particles by ion exchange, and an amphiphilic particle emulsion catalyst (PWO-J) was prepared. Hydrogen peroxide was used as the oxygen source, and the amphiphilicty of the catalyst was used to assemble the catalyst at the Pickering emulsion interface. The PWO-J catalyst was found to exhibit very high catalytic activity toward the oxidation of oleic acid in water-in-oil systems. The results showed that PWO-J catalysis of oxidation had similar results as CTAB and phosphotungstic acid (control system) under the same conditions. The azelaic acid recovery rate was 86.7%, and PWO-J could be reused 4 times. A reaction mechanism was proposed, and the constructed model was used to calculate a reaction rate constant of 15.32 × 10⁻⁵L•mol⁻¹•s⁻¹ for the PWO-J system. The PWO-J system had a lower activation energy than the control system, showing that the catalytic oxidation of oleic acid into azelaic acid was more likely to occur in the PWO-J system.     

A simple and efficient method for the allylation of heteroarenes catalyzed by PdCl2

The PdCl₂-catalyzed allylation of heteroarenes is presented. Various heteroarenes including O-, N-, and S-based ones were allylated efficiently with a rich range of allylic acetates in the presence of only 2 mol % of PdCl₂, without the need of bases/acids, additives, and external supporting ligands. In addition, the reactions were carried out under mild and simple conditions just by stirring the two reactants and catalyst in CH₂Cl₂ at 60 °C. Moreover, the by-product produced was non-toxic acetic acid. Thus, the method presented in this work provides a general, clean, and operationally simple approach for the functionalization of heteroarenes. Finally, a preliminary mechanistic study suggested that the Pd(II) may be reduced in situ by the heteroarenes to Pd(0), which serves as the active metal center to catalyze the following allylations of heteroarenes via a Tsuji–Trost pathway.     

Zn or O? An Atomic Level Comparison on Antibacterial Activities of Zinc Oxides

For the first time, the influence of different types of atoms (Zn and O) on the antibacterial activities of nanosized ZnO was quantitatively evaluated with the aid of a 3D‐printing‐manufactured evaluation system. Two different outermost atomic layers were manufactured separately by using an ALD (atomic layer deposition) method. Interestingly, we found that each outermost atomic layer exhibited certain differences against gram‐positive or gram‐negative bacterial species. Zinc atoms as outermost layer (ZnO?Zn) showed a more pronounced antibacterial effect towards gram‐negative E. coli (Escherichia coli), whereas oxygen atoms (ZnO?O) showed a stronger antibacterial activity against gram‐positive S. aureus (Staphylococcus aureus). A possible antibacterial mechanism has been comprehensively discussed from different perspectives, including Zn²⁺ concentrations, oxygen vacancies, photocatalytic activities and the DNA structural characteristics of different bacterial species.     

White-light-emitting diodes using GaN-excited CdSe/CdS/ZnS quantum dots

Fluorescence-based white-light-emitting diodes (WLEDs) were fabricated using blue GaN chips and green- and red-emitting CdSe/CdS/ZnS quantum dots (QDs). The coordinate and color temperature of the WLEDs could be varied because of the size-tunable emission of CdSe QDs from 510 to 620 nm. Warm and cold white emissions were confirmed with the color temperature ranging from 4000 to 9000 K. Color coordinates were analyzed at different bias. The fast enhancement of blue emission resulted in the shift of color coordinates to the cold side. The stability of white emission during operation was analyzed; stable spectra were achieved within 90 min.